期刊名称：International Journal of Advanced Computer Science and Applications(IJACSA)
印刷版ISSN：2158-107X
电子版ISSN：2156-5570
出版年度：2020
卷号：11
期号：2
DOI：10.14569/IJACSA.2020.0110244
出版社：Science and Information Society (SAI)
摘要：Increasing the receiver’s bitrate and suppressing the spectral line are issues of major interest in the design of compliant Time-Hopping Impulse Radio (TH-IR) Ultra-Wide Band (UWB) systems. Suppression of spectral lines has been commonly addressed by randomizing the position of each pulse to make the period as large as possible. Our analysis suggests that this influences the overall shape of a signal’s Power Spectral Density (PSD) in a way that is useful for spectral line suppression or diminishing the PSD maximum peak power. A method for utilizing the system to generate a Dynamic-Location Pulse-Position Modulated (DLPPM) signal for transmission across a UWB communications channel is presented, and an analytical derivation of the PSD of a proposed DLPPM signal TH-IR UWB is introduced. Our proposed method can be applied without affecting the users of other concurrent applications. The theoretical model for DPLM TH-IR is compared with the PSD for conventional DPLM TH-IR. The results show that spectral estimation methods based on Fast Fourier Transform (FFT) significantly overestimate the continuous part of the PSD for small and medium signal lengths, which has implications for assessing interference margins by means of simulation. Another purpose of this paper is to improve a predesigned system by increasing the receiver’s bitrate. This will be achieved by using the bits that control the sub-slot technique as information and designing a receiver capable of detecting them. The bitrate is effectively doubled. Finally, the proposed system for DPLM TH-IR has been built inside Simulink/MATLAB to test its results via a conventional DPLM TH-IR system.
