摘要：Y block has entered the ultra-high water cut stage of production, and the water cut of oil wells is generally higher than 90%. Before polymer flooding, water cut continues to rise. High-water-bearing wells in the injected area are characterized by difficulty in effectiveness and low water cut decline, which seriously affects the overall development effect of the area. In this paper, the high water-bearing wells are divided into four categories by the parameter index of the number of layers in the high water-bearing channels before polymer flooding.Through the splitstream curve and the phase permeability curve, the permeability and oil saturation data under the condition of 98% water content were selected for fitting, and the critical oil saturation formula was obtained.The ratio between the oil saturation and the critical oil saturation is calculated by numerical simulation, and the discriminant standard of the dominant seepage channel with high water content is established.Compared with previous remaining oil saturation field identification methods, changed the method according to the conventional ideas of remaining oil saturation evaluation of water and residual oil, through the analysis of reservoir permeability parameters for the current development under the condition of the target reservoir quantitative identification of the cause of high water cut, to cause high containing water wells and reservoir high water cut oilfield management work provide quantitative analysis and objective guidance.
