摘要：An EPJ process simulation model was set up and verified to simulate the plasma gasification process of the medical wastes. The influence of ER value and SAMR value was simulated based on experimental conditions including material feeding rate, furnace temperature and medical waste properties. Results shows that ER=0.3 is a turning point for medical waste plasma gasification. The required input plasma power and volume flow of combustible constituents in syngas reach the maximum at ER=0.3. The balance of syngas composition and required input plasma power should be overall considered. Results shows that the SAMR value mainly influences the amount of H element and N element in the system at a fixed ER value, thus influencing the proportions of H2 and N2 in monotonous ways. Input plasma power needed and combustible syngas flow increase with the increasing SAMR.
