摘要：In the paper, an experimental study for calculation the heat quantity through a flat wall by electronic system has been presented. The aim is temperature measurement on outer and inner walls of a room for 20 days at 1-minute interval of measurement. A transient regime has been considered. The data measured has been collected on a non-insulated south wall of a Technical University of Varna campus building. The wall layers parameters have to be known for the choice of surrounding area. In order to reduce errors of the outer side of wall temperature measurement caused by the solar radiation, the temperature sensor has been painted grey. The experimental equipment for the heat quantity measurement consists of two plates, each with 4 temperature fixed in a rectangle. The sensors are situated in а flat area in order to obtaining more precise results of experimental study. The problem has been solved by finding decision of the classic heat conduction equation. The experimental temperatures are treated by microprocessor’s platform based on Arduino board. As a result, the average temperature of each plate with sensors has been estimated.
