摘要：The influence of different cutting parameters on the glass edge quality was investigated, including the cutter material, the sharpening angle of the cutting roll, the cutting speed and the load applied to the roll. The results show that there are less defects on the edge of the glass cut by diamond cutter. There is no obvious influence of cutting speed on the glass edge quality. The cutter with a smaller sharpening angle is more applicable for the cutting of thin glass, and the thick glass is more suitable to use a bigger sharpening angle cutter. Higher cutting load is helpful for the breaking of the glass along the cutting line. However, it may cause more defects on the edge and the surface of the glass.
