摘要：Abstract Iron tailings have few macropores which severely inhibit infiltration and transport of soil water. Polyacrylamide (PAM) can regulate soil water, but it is rarely used when remediating tailings matrix. In this research, PAM of four molecular weights of 300w, 600w, 800w, and 1000w were selected as amendments, and were each applied at five mass concentrations of 0% (CK), 0.01%, 0.04%, 0.08%, and 0.16% to observe their effects on water transport in iron tailings using column simulations in the laboratory. After adding PAM, the water retention and saturated water content of iron tailings increased significantly ( P < 0.05). With increases in PAM molecular weight and mass concentration, the saturated hydraulic conductivity showed a downward trend, but the saturated hydraulic conductivity increased after a dry–wet cycle. With the increase of PAM mass concentration, adding PAM of 1000w molecular weight to iron tailing decreased infiltration capacity, but treatments of other molecular weights all initially increased then decreased infiltration capacity. The greatest improvement on infiltration capacity of iron tailings was observed with the addition of PAM of 300w molecular weight and 0.01% mass concentration. Adding PAM increased the vertical depth of the saturation zone of iron tailings ( P < 0.05) with a maximum depth of 20.83 cm. The Kostiakov model more accurately simulated water infiltration of iron tailings compared with the Horton and Philip models. On the whole, when PAM of low molecular weight and concentration was added to iron tailings, PAM increased stable infiltration, saturated water content, and water retention. It also inhibited saturated hydraulic conductivity of iron tailings. Therefore, in practice, it is necessary to select the appropriate molecular weight and mass concentration of PAM according to the dominant limiting factors and remediation needs of the matrix.
其他摘要：Abstract Iron tailings have few macropores which severely inhibit infiltration and transport of soil water. Polyacrylamide (PAM) can regulate soil water, but it is rarely used when remediating tailings matrix. In this research, PAM of four molecular weights of 300w, 600w, 800w, and 1000w were selected as amendments, and were each applied at five mass concentrations of 0% (CK), 0.01%, 0.04%, 0.08%, and 0.16% to observe their effects on water transport in iron tailings using column simulations in the laboratory. After adding PAM, the water retention and saturated water content of iron tailings increased significantly ( P < 0.05). With increases in PAM molecular weight and mass concentration, the saturated hydraulic conductivity showed a downward trend, but the saturated hydraulic conductivity increased after a dry–wet cycle. With the increase of PAM mass concentration, adding PAM of 1000w molecular weight to iron tailing decreased infiltration capacity, but treatments of other molecular weights all initially increased then decreased infiltration capacity. The greatest improvement on infiltration capacity of iron tailings was observed with the addition of PAM of 300w molecular weight and 0.01% mass concentration. Adding PAM increased the vertical depth of the saturation zone of iron tailings ( P < 0.05) with a maximum depth of 20.83 cm. The Kostiakov model more accurately simulated water infiltration of iron tailings compared with the Horton and Philip models. On the whole, when PAM of low molecular weight and concentration was added to iron tailings, PAM increased stable infiltration, saturated water content, and water retention. It also inhibited saturated hydraulic conductivity of iron tailings. Therefore, in practice, it is necessary to select the appropriate molecular weight and mass concentration of PAM according to the dominant limiting factors and remediation needs of the matrix.
