期刊名称：Chemical Industry and Chemical Engineering Quarterly
印刷版ISSN：1451-9372
出版年度：2017
卷号：23
期号：2
页码：197-206
DOI：10.2298/CICEQ151217031L
出版社：Association of the Chemical Engineers
摘要：The aim of this study was to determine the effect of the main milling variables, i.e., agitator shaft speed (50, 75 and 100%, which is 25, 37.5 and 50 rpm) and milling time (30, 45 and 60 min) on physical and sensory properties of fat filling, as well as on energy consumption during the production in a laboratory ball mill. Within the response surface method, the face centered central composite design is used. A response surface regression analysis for responses was performed and a full quadratic model was fitted to the experimental data. It is shown that agitator shaft speed had the most significant influence on physical properties (particle size distribution, rheological and textural propertes) and sensory characteristics of fat filling, while the milling energy consumption is highly influenced by milling time with contribution 55.4%, followed by agitator shaft speed (40.04%). The model obtained by regression analyses was used to perform the optimization of processing parameters in order to provide the combination of agitator shaft speed and milling time that cost less energy while at the same time do not compromise the quality of the fat filling. Optimization of production of fat filling in a laboratory ball mill would imply the maximum agitator shaft speed and 30-min milling time.
