首页    期刊浏览 2025年04月17日 星期四
登录注册

文章基本信息

  • 标题:Optimization of UV-Electroproxone procedure for treatment of landfill leachate: the study of energy consumption
  • 本地全文:下载
  • 作者:Majid Kermani ; Abbas Shahsavani ; Pegah Ghaderi
  • 期刊名称:Journal of Environmental Health Science and Engineering
  • 印刷版ISSN:2052-336X
  • 出版年度:2021
  • 卷号:19
  • 期号:1
  • 页码:81-93
  • DOI:10.1007/s40201-020-00583-9
  • 出版社:BioMed Central
  • 摘要:Abstract With increased population, treatment of solid waste landfill and its leachate is of major concern. Municipal landfill leachate shows variable, heterogeneous and incontrollable characteristics and contains wide range highly concentrated organic and inorganic compounds, in which hampers the application of a solo method in its treatment. Among different approaches, biological treatment can be used, however it is not effective enough to elimination all refractory organics, containing fulvic-like and humic-like substance. In this experimental study, the UV Electroperoxone process as a hybrid procedure has been employed to treat landfill leachate. The effect of various parameters such as pH, electrical current density, ozone concentration, and reaction time were optimized using central composite design (CCD). In the model fitting, the quadratic model with a P-Value less than 0.5 was suggested (< 0.0001). The R 2 , R 2 adj, and R 2 pre were determined equal to 0.98,0.96, and 0.91 respectively. Based on the software prediction, the process can remove 83% of initial COD, in the optimum condition of pH = 5.6, ozone concentration of 29.1 mg/l. min, the current density of 74.7 mA/cm 2 , and process time of 98.6 min. In the optimum condition, 55/33 mM H 2 O 2 was generated through electrochemical mechanism. A combination of ozonation, photolysis and electrolysis mechanism in this hybrid process increases COD efficiency removal up 29 percent which is higher than the sum of separated mechanisms. Kinetic study also demonstrated that the UV-EPP process follows pseudo-first order kinetics (R 2  = 0.99). Based on our results, the UV-EPP process can be informed as an operative technique for treatment of old landfills leachates.
  • 其他摘要:Abstract With increased population, treatment of solid waste landfill and its leachate is of major concern. Municipal landfill leachate shows variable, heterogeneous and incontrollable characteristics and contains wide range highly concentrated organic and inorganic compounds, in which hampers the application of a solo method in its treatment. Among different approaches, biological treatment can be used, however it is not effective enough to elimination all refractory organics, containing fulvic-like and humic-like substance. In this experimental study, the UV Electroperoxone process as a hybrid procedure has been employed to treat landfill leachate. The effect of various parameters such as pH, electrical current density, ozone concentration, and reaction time were optimized using central composite design (CCD). In the model fitting, the quadratic model with a P-Value less than 0.5 was suggested (< 0.0001). The R 2 , R 2 adj, and R 2 pre were determined equal to 0.98,0.96, and 0.91 respectively. Based on the software prediction, the process can remove 83% of initial COD, in the optimum condition of pH = 5.6, ozone concentration of 29.1 mg/l. min, the current density of 74.7 mA/cm 2 , and process time of 98.6 min. In the optimum condition, 55/33 mM H 2 O 2 was generated through electrochemical mechanism. A combination of ozonation, photolysis and electrolysis mechanism in this hybrid process increases COD efficiency removal up 29 percent which is higher than the sum of separated mechanisms. Kinetic study also demonstrated that the UV-EPP process follows pseudo-first order kinetics (R 2  = 0.99). Based on our results, the UV-EPP process can be informed as an operative technique for treatment of old landfills leachates. Graphical abstract
  • 关键词:Design Expert software;Optimization;UV-Electroproxone process;landfill leachate
国家哲学社会科学文献中心版权所有