摘要：Comparisons of Eta 5 km mesoscale model forecasts against observations in Cunha, Curucutu, Itanhaém, Paraibuna, Picinguaba, Santa Virgínia e São José dos Campos, located in Serra do Mar (SP) region, is carried out for 2008. The 2 m The 2 m temperature, station level pressure, winds at 10 m and precipitation are evaluated for the 24 h, 48 h and 72 h forecasts. The results show that the atmospheric pressure was systematically underestimated (overestimated) in Paraibuna and Picinguaba (Cunha and Curucutu), due to differences between the model’s altitude and the real station altitude, although its diurnal cycle is well predicted, with two maximum (0 and 12 Z) and two minimum (6 and 18 Z), as observed. For atmospheric pressure, model’s performance is better at the 48 h forecast. The temperature’s diurnal cycle is very well predicted. The temporal correlation The temperature’s diurnal cycle is very well predicted. The temporal correlation The temporal correlation (CORR) between forecasts and observations are very high, varying from 73 to 91%. In some locations it was observed that temperature was overestimated (near 3ºC in Curucutu and Santa Virgínia and 2ºC in Itanhaém), and that it was a systematic error. The temperature forecasted 24 h in advance is superior than the other forecasts. In general the model shows a tendency of underestimate (overestimate) the frequence of occurrence of calm (strong) winds. The wind direction is the most diffcult variable to forecast due probably to the differences between model’s topography and the real topography. Although the model shows the characteristic turning of the wind during the day caused by the daily warming. The total monthly precipitation is well predicted, although in Itanhaém, Paraibuna and mainly in em Picinguaba the values are overestimated. The frequence of occurrence of rainy events (total daily precipitation ≤ 0,3 mm) is overestimated by the model, although it is the best predicted category, with higher ETS, BIAS and H. The analyses shows that one of the model’s source of error is related to its topography.
