其他摘要:In the practical engineering design, structural engineering staffs did not attach importance to fixed end of high-rise building structure. This will cause material waste, and will also leave hidden troubles to the high-rise building structure. Some of the structural designers have mistakes in the definition of fixed end of the tall building, who regard them as mechanics embedment, but in fact it should be strength-mounted. Specification makes requirements clearly about the roof of the underground layer as embedding end. In this paper, three basement flat area types of high-rise building structure embedded end have been studied. It comes to conclusions 1) there are different embedding positions in different basement flat forms under normal circumstances, and 2) the lateral stiffness ratio of ground floor with the relevant range of underground floor is the key to measure whether the basement roof can be used as a high-rise building structure embedded fixed end.