摘要：Superior properties of maraging steels make them suitable for the fabrication of components used for military applications like missile covering, rocket motor casing and ship hulls. Welding is the main process for fabrication of these components, while the maraging steels can be fusion welded using gas tungsten arc welding (GTAW) process. All these fabricated components require longer storage life and a major problem in welds is susceptible to stress corrosion cracking (SCC). The present study is aimed at studying the SCC behaviour of MDN 250 (18% Ni) steel and its welds with respect to microstructural changes. In the present study, 5.2 mm thick sheets made of MDN 250 steel in the solution annealed condition was welded using GTAW process. Post-weld heat treatments of direct ageing (480 C for 3 h), solutionizing (815 C for 1 h) followed by ageing and homogenizing (1150 C for 1 h) followed by ageing were carried out. A mixture of martensite and austenite was observed in the microstructure of the fusion zone of solutionized and direct aged welds and only martensite in as-welded condition. Homogenization and ageing treatment have eliminated reverted austenite and elemental segregation. Homogenized welds also exhibited a marginal improvement in the corrosion resistance compared to those in the as-welded, solutionized and aged condition. Constant load SCC test data clearly revealed that the failure time of homogenized weld is much longer compared to other post weld treatments, and the homogenization treatment is recommended to improve the SCC life of GTA welds of MDN 250 Maraging steel.
关键词：18% Ni maraging steel; Gas tungsten arc welding; Post weld heat treatment; Solutionising; Ageing treatment; Pitting corrosion; Stress corrosion cracking (SCC)
