出版社：Defence Scientific Information & Documentation Centre
摘要：The benefits of multisensor data fusion (MSDF) in controlling the piezo actuated beam structure using sliding mode controller (SMC) has been brought out. The first two vibrating modes of the smart cantilever beamare measured by two sensors namely, piezoelectric sensor and laser displacement sensor. The states are estimated from the sensors outputs using information filter, which were then fused and applied as input to the controller. The controller has been designed from the linear dynamic model of a piezo actuated beam, identified using linear recursive least square (RLS) method based on ARX model. A digital control system consisting of virtual instrumentation software LabVIEW, and USB data acquisition module NI 6008, was used for simulation and real-time control. Improved closed-loop performance was obtained when the controller designed used fused data, as compared to the closed-loop performance obtained with a single sensor. The beam structure considered in this work was a pilot model of the structures used in aerospace applications. Simulation and experimental results presented demonstrate the benefits of data fusion in controlling the vibration modes. Defence Science Journal, 2011, 61(4), pp.346-353 , DOI:http://dx.doi.org/10.14429/dsj.61.1114
关键词：Smart structure, information filter, data fusion, sliding mode controller, piezoelectric sensors, piezoceramics, multisensor data fusion
