1.A CHOICE OF THE OPTIMUM CUTTING RANGES FOR CUTTING NOZZLES A-SD FOR SELECTION OF METALLURGICAL MATERIAL

作　　者：Dana Stančeková ;Dana Stančeková ;Anna Rudawska 等

出　　处：Advances in Science and Technology Research Journal. 2018 ;12(3):106-113.doi:10.12913/22998624/92095

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1021545282

文章详细

2.The Properties of Regenerative Polymer Mass

作　　者：Anna Rudawska ;Anna Rudawska ;Albert Wierzchowski 等

出　　处：Advances in Science and Technology Research Journal. 2017 ;11(3):130-138.doi:10.12913/22998624/71149

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1011779962

文章详细

3.Effect of the Cutting Tool Geometry on the Tool Wear Resistance When Machining Inconel 625

作　　者：Tomáš Zlámal ;Tomáš Zlámal ;Jiří Hajnyš 等

出　　处：Advances in Science and Technology Research Journal. 2017 ;11(4):286-293.doi:10.12913/22998624/80925

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1011780019

文章详细

4.EFFECT OF CHIP BREAKERS ON THE CUTTING FORCE DURING THE MACHINING OF STEEL C45

作　　者：Jiří Kratochvíl ;Jiří Kratochvíl ;Jana Petrů 等

出　　处：Advances in Science and Technology Research Journal. 2017 ;11(1):173-178.doi:10.12913/22998624/66506

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1011780077

文章详细

5.IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625

作　　者：Jiří Hajnyš ;Jiří Hajnyš ;Tomáš Zlámal 等

出　　处：Advances in Science and Technology Research Journal. 2016 ;10(32):24-31.doi:10.12913/22998624/65111

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1011780092

文章详细

6.MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS

作　　者：Tomáš Zlámal ;Tomáš Zlámal ;Jana Petrů 等

出　　处：Advances in Science and Technology Research Journal. 2016 ;10(31):144-150.doi:10.12913/22998624/64074

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1011780142

文章详细

7.SURFACE MICROHARDENING STUDIES ON STEELS AFTER HIGH FEED MILLING

作　　者：Jana Petrů ;Jana Petrů ;Tomáš Zlámal 等

出　　处：Advances in Science and Technology Research Journal. 2018 ;12(2):222-230.doi:10.12913/22998624/91888

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1019710270

文章详细

8.Effect of the Cutting Tool Geometry on the Tool Wear Resistance when Machining Inconel 625

作　　者：Tomáš Zlámal ;Tomáš Zlámal ;Jiří Hajnyš 等

出　　处：Advances in Science and Technology Research Journal. 2018 ;12(1):236-243.doi:10.12913/22998624/86262

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1019710358

文章详细

9.Dependence of the Cross Section of the Cut Layer on the Specific Cutting Resistance

作　　者：Jana Petrů ;Tomáš Zlámal ;Lukáš Drábek 等

出　　处：MATEC Web of Conferences. 2019 ;254.doi:10.1051/matecconf/201925404008

出版社：EDP Sciences

文章 ID：1022258135

文章详细

10.Experimental Investigation of Cutting Forces in High-Feed Milling of Titanium Alloy

作　　者：Jana Petrů ;Lukáš Drábek ;Jiří Hajnyš 等

出　　处：Advances in Science and Technology Research Journal. 2020 ;14(1):89-95.doi:10.12913/22998624/113615

出版社：Society of Polish Mechanical Engineers and Technicians

文章 ID：1026493353

文章详细

	Jana Petrů	10篇
	Tomáš Zlámal	6篇
	Jiří Hajnyš	5篇
	Marek Pagáč	4篇
	Anna Rudawska	3篇

	Dalibor Jurok	2篇
	Ivan Mrkvica	2篇
	Jozef Holubják	2篇
	Lukáš Drábek	2篇
	Albert Kulla	1篇
	Albert Wierzchowski	1篇
	Dana Stančeková	1篇
	František Špalek	1篇
	Jakub Měsíček	1篇
	Jiří Kratochvíl	1篇
	Jozef Mrazik	1篇
	Miroslav Müller	1篇
	Nataša Náprstková	1篇
	Ondřej Vortel	1篇
	Pavel Krajkovič	1篇
	Robert Čep	1篇

全文

出版年度

作者

文章类型

来源期刊

语种

检索条件:"( ( 高级检索(( ((AU:(("Jana Petrů")))) )) ) )"

	Advances in Science and Technology Research Journal	9篇
	MATEC Web of Conferences	1篇